Wi-Fi
Coverage you can count on.
Every access point gets a permanent, tested cable path back to the network rack, so coverage is planned rather than improvised.
Low voltage contractor · New York City & Long Island
Low voltage contractor for New York City and Long Island.
Structured cabling, commercial networks and Wi-Fi, IP cameras, access control, intercom, commercial AV, fiber, and racks. Clean, labeled, tested, and documented when those items are in the approved scope.
Project availability and final scope are confirmed after review.
Ask LVNET
What does this building need?
Ask about cabling, Wi-Fi, cameras, access, or AV. Answers stay inside what LVNET actually does.
Tell me the site and what has to work. I can start with cabling, Wi-Fi, cameras, access, or AV.
One coordinated physical layerEvery system, one dependable foundation
Services
What does your space need to work?
Structured cabling
Cat6, Cat6A, termination, labels, testing and rack organization as defined in scope.
Explore service →Networks and Wi-Fi
Switching, PoE, access points, configuration and verification coordinated with the space.
Explore service →Cameras and recording
Coverage, pathways, recording and remote-access requirements resolved together.
Explore service →Access and intercom
Readers, controllers, door hardware, credentials and entry workflow.
Explore service →Audio, video and control
Displays, sources, speakers, pathways and room-control requirements.
Explore service →Fiber paths
Inter-building connectivity, fault isolation, repair and scope-defined verification.
Explore service →Connected homes
Networks and pathways planned around everyday audio, video, security and controls.
Explore service →Service and recovery
Tracing, cleanup and practical next steps when records or inherited systems are incomplete.
Explore service →Walkthrough to handoff
One physical layer. Four systems on the same foundation.
Wi-Fi, cameras, door access and AV all ride the same cabling foundation. That shared layer is what makes the whole building dependable, and it is what LVNET plans first.
Review network scope
Cameras
Visibility without blind guessing.
Camera locations, pathways, power and recording are resolved as one system, not device by device.
Access control
Entry that stays under control.
Door readers and controllers ride the same network foundation while locks and credentials are coordinated separately.
Audio & video
Rooms that just work.
Displays, speakers and control systems connect over clean pathways planned before the walls close.
The foundation
A system that can be traced and serviced.
Every path is labeled, tested and documented as defined in the approved scope, so the next change is easy instead of expensive.
Scope before promise.
Walkthrough, install, test, handoff.
- 01
Walkthrough
Review pathways, equipment locations, operating constraints and existing conditions before a promise is written.
- 02
Install
Build the approved scope: cabling, devices, racks and pathways coordinated with the site and other trades.
- 03
Test
Complete the cable tests and labels included in the written proposal, not a verbal assurance at the end.
- 04
Handoff
Deliver the records defined in scope so the installed system can be traced and serviced.
The service standard
Installed is not finished. Documented is finished.
Labeled at both ends
Ports, faceplates and cables carry matching identifiers when labeling is defined in the approved scope, so a path can be traced without guesswork.
Tested against the proposal
Verification follows the acceptance criteria written into the scope, not a verbal assurance at the end of the job.
Records someone can service
Port maps, test results and project records defined in the proposal keep the system serviceable long after handoff.
Anonymized project evidence
Real scope thinking. Private clients.
Commercial multisystemOne cabling foundation coordinated data, Wi-Fi, cameras, intercom and access.Review project examples
Existing-site modernizationReuse what proves reliable before deciding what to replace.
Fiber recoveryRestore the physical link before chasing problems higher in the stack.
Existing cabling and equipment were evaluated before replacement decisions were made.
Fault isolation and fiber repair returned connectivity between separate buildings.
Project areas
Documented experience across New York.
Historical project experience, stated carefully. Availability is confirmed for every specific site after review.
The handoff standard
Clean, labeled, tested, documented when those items are in the approved scope.
Practical answers
Useful information before the first walkthrough.
What information helps you prepare a proposal?
Share the site address, system goals, preferred timing, and any photos, plans, device lists or known problem areas.
Can you add to an existing system?
Often, yes. LVNET first documents what is installed, what can be reused and what may affect the scope.
Do you test and label network cabling?
The approved scope can include termination, labels, cable testing, patch-panel organization, port mapping and records.
How is scheduling confirmed?
Scheduling follows review of the scope, site access, operating constraints and coordination requirements.
Start with the site.
Tell us what needs to work.
Send the address, goals, timing, and any photos or drawings already available.